Stiebel Eltron SHC-4 Mini Tank Point-of-Use Water Heater
Stiebel Eltron SHC-4 | List Price: CDN$ Our Price: CDN$299.00 You save: $64.00 |
|
Choose Refurbished |
|
|
Limited Quantity of Factory Refurbished units available. Save an additional $100.00! - more info - |
CDN$199.00 |
The Stiebel Eltron SHC-4 mini-tank point-of-use water heater is ideal for bathroom sinks, kitchens, commercial washrooms, and a wide range of other point of use applications where only a small amount of hot water is required during each use (hand washing, etc.). Due to its small size, the SHC-4 conveniently fits directly under the sink or adjacent cupboard or closet, so it delivers hot water to the sink almost instantly. By locating the heater right near the point-of-use, you can also eliminate thermal heat loss commonly associated with long pipe runs. If the SHC-4 can supply all of the hot water needs for the room, in new construction applications, you also eliminate the need to run a hot water line all the way from the main central water heater which can save you significant money in plumbing and material cost.
The Stiebel Eltron SHC-4 Mini Tank Water Heater features a glass lined tank and excellent insulation to substantially reduce stand-by heat loses in comparison with conventional tank water heaters. Lightweight and compact, the SHC 4 mounts to directly to the wall or the side of the cupboard with a sturdy bracket (included). Once it is filled with water, simply plug it into a standard 110-120V electrical outlet. With only an 11 AMP electrical current draw, no special wiring is necessary!
Temperature & Pressure (T & P) valve included.
Warranty: 6 year warranty on tank, 2 years on other components
Stiebel Eltron SHC-4 Mini-Tank Water Heater Specifications |
|
|---|---|
| Thermostatically Controlled? | Yes |
| Maximum Temp Setting | 140F (60C) |
| Nominal Water Volume | 4.0 gallons (15 L) |
| Watts | 1300 |
| Voltage: | 110 - 120 volts / single phase / 50 - 60 Hz |
| Max. Amps: | 11.3 |
| Dimensions: | 19.75H x 12.6W x 12.5D" (50 x 32 x 31.8 cm) |
| Weight: | 19.8 lbs (9 KG) |
| Pipe Fittings: | 1/2" NPT |
| Recovery Time: | 27 minutes |
| Max. Water Pressure: | 150 psi (10 bar) |
| Safety: | ETL Listed (US/CAN) |
| Protection: | Temperature & Pressure (T & P) relief valve included |
*Please note: The SHC-4 can be plugged into a standard 110/120v electrical outlet however, we recommend that the outlet be dedicated to the water heater.
* Breaker size and wire gauge must meet all applicable local, state, provincial, and national electrical codes for your area - these are only guidelines that will apply to most installations. Please consult your electrician for more details.